CONDUCTIVITY  CONTROL A DIVISION OF PATHFINDER INSTRUMENTS

  www.conductivitycontrol.com                                                                                             800 284 9698

 

 

HOME                  

CONTACT US

HOW TO ORDER

LINKS

 

PRODUCTS

CONTROLLERS

TRANSMITTERS            

ELECTRODES

MONITORS

HANDHELD METERS

BENCHTOP METERS

ACCESSORIES   

 

MANUFACTURES

PATHFINDER

SIGNET

SENSOREX

JENCO

NEWPORT

 

    The conductivity sensor is probably the most important factor to consider when selecting a conductivity system. Selection must be based on the following criteria: 1. proper cell constant, 2. proper range on analyzer, 3. choice for proper materials or wetted parts and electrodes, 4. proper sensor mounting

ELECTRODES - Conductivity / Resistivity

      Pathfinder model CS-1000 In -Line/ submersion conductivity electrodes   Low Cost ,flat surface 3/4" PVC probe with Graphite electrodes with ATC thermostat, K= 1.0
Pathfinder model CS-100 In -Line/ submersion conductivity electrodes  Low Cost ,Stainless steel electrodes 3/4" PVC and polypro probe  with ATC thermostat, K= 0.1
    Pathfinder model CS-5000 In -Line/ submersion conductivity electrodes   Low Cost , flat surface 3/4" PVC /polypro probe with Graphite electrodes with ATC thermostat, K= 2.3
     Pathfinder model CS-3000 In -Line/ submersion conductivity electrodes  Low Cost , flat surface 1" PVC probe with Graphite electrodes with ATC thermostat, K= 3.0
   Sensorex Process conductivity sensor   These models are ideal for all conductivity applications and are available in 0.1, or1.0  cell constant (k).
Sensorex Lab Conductivity Sensor They feature graphite or platinum ring measuring surfaces.
Conductivity Calibration Solutions SensorexConductivity Sensor Accessories Solutions, Transmitters & Fitings
SensorexTCS1000 toroidal conductivity sensor  Toroidal conductivity sensor provides a non-contacting inductive conductivity measurement over a wide measuring range from 0 - 2,000,000 uS/cm.
        Signet 2839-2842 Dryloc conductivity/ resistivity Electrodes

DryLoc electrode connector for use with 2850 Conductivity/Resistivity Sensor Electronics

 

         Signet 2839-2842NPT conductivity/ resistivity Electrodes available in four cell constants from 0.01 to 10.0
SIGNET 2819-2823 CONDUCTIVITY / RESISTIVITY ELECTRODES Controlled surface finish ensures accuracy and repeatability

SIGNET 2850 DRY LOC CONDUCTIVITY / RESISIVITY SENSOR Water Treatment & Water Quality Monitoring

NEW         NEW

SIGNET 2850 Conductivity/Resistivity Sensor

Electronics and Integral System

 

PRICES SUBJECT TO CHANGE WITHOUT NOTICE

 ©2006 CONDUCTIVITY CONTROL

           A Division of Pathfinder Instruments, LLC - All right reserved